$1,250.00 inc GST
5 output control system
2 x pumps
1 x blower
1 x circ pump
1 x ozone
1 x light
1 x Direct Input for Stereo ect
Available in 2kw or 4kw heater
Depending what is plugged into the unit & its programming its 230volt 50Hz can be configured from 15amp to 40amp Max
415volt 50Hz 20amp per phase.
Suits in.K300, in.K450, in.K500, in.K600 ( Menu Driven), in.K800 and the in.K1000 touch pads
Spa Tech New style Temperature Sensor
With Chunky nut and larger diameter thread
Spa Boost is to be used both weekly, and after heavy bath loads, and will help prevent cloudy or green water, scum lines, and build ups of body fats and oils.
This 500g should last approximately 3 months based on weekly doses in a 1000L spa, and 1 additional weekly dose is required for heavy bath loads.
Weekly dosage: 20g per thousand litres
Active constituent: Potassium Peroxymonosulfate triple salts
Sizes available: 500g, 2kg, 5kg
This 500ml bottle and is expected to last approximately 2 months for a 1000L spa. (Based on bather load)
Weekly dosage: 60ml per 1000 litres
Active constituent: Polyhexanide Hydrochloride
Sizes available: 500ml, 2.5L, 5L
Spa Tech CII 3kw Heater Tube with temperature Sensors
Manual Hi Limit reset
Replacement Circuit Board (PCB)
Suits Spa-Tech CII System
Must be fitted by a Qualified Electrician
Replacement Circuit Board (PCB)
Suits Spa-Tech CIII System
Must be fitted by a Qualified Electrician
Spa Tech CII Controller with 3kw
Can support 2 pumps, blower, circulation pump, ozone and lights
Touch Pad included
Awesome in field retro-fit option
New Style Spa Tech CIII 3kw Heater Tube with temperature Sensors
Automatic Hi Limit reset
Gecko Aeware 3kw in.ye.5 spa controller
Touchpad not included
5 outputs – offers a combination of 5 of the following – 1, 2 or 3 pumps, blower, circ pump, ozone, light, aux/direct input
Multiple component combinations available on this unit see manufacturers specifications
230volt 50Hz this unit can be configured from 15amp to 40amp Max (Dependingon setup and use of the outputs)
